■ When there is a problem with internal temperature
z
The status of the indicator is displayed with the following symbols.
L: Off, G: On, #: Flashing, I: On or Flashing
Indicator
<STAND-
<WARNING
<POWER>
BY>
TEMP.>
Green
Red
Red
*1
G
L
#
*3
*4
L
#
#
*4
L
G
#
*1: The indicator will change according to different conditions, regardless of the status of other indicators.
*2: The indicator will turn on or flash under certain conditions, regardless of the status of other indicators.
*3: The indicator will flash in approximately 1-second intervals.
*4: The indicator will flash in approximately 0.5-second intervals.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
<WARNING
<LAMP
<SHUTTER>
FILTER>
REPLACE>
Blue
Orange
Orange
*2
*2
*2
I
I
I
*2
*2
*2
I
I
I
*2
*2
*2
I
I
I
About indicator status
Status of the projector
If the temperature within the projector becomes too
high, the temperature indicator <WARNING TEMP.>
will start to flash slowly.
If the temperature within the projector becomes even
higher, the temperature indicator <WARNING TEMP.>
will flash faster, the power indicator <POWER> will
turn off, and the projector will turn off automatically.
The projector will not turn back on even when pressing
the power <ON> button on the remote control or the
power <ON/STAND-BY> button on the control panel.
When the projector returns to the normal operating
temperature, the standby indicator <STAND-BY> will
change to on. The projector will turn back on when
pressing the power <ON> button on the remote
control or the power <ON/STAND-BY> button on the
control panel. (The temperature indicator <WARNING
TEMP.> will remain flashing.) Check the air filter.
The projector has cooled inside, and returned to
operating temperature. Pressing the power <ON>
button on the remote control or the power <ON/
STAND-BY> button on the control panel will make
the temperature indicator <WARNING TEMP.> stop
flashing and operate the projector. Check the air filter.
ENGLISH - 79