Installation - Honeywell MP10CESWW Manual Del Propietário

INSTALLATION

1 Install the plastic hose with window bracket adapter and hose connector on both sides.
Ensure proper fit on both ends.
2 Adjust the window bracket as per width or height of your window and insert the plastic
pins to fix at the desired position. There is a hole where the Plastic Hose will be inserted
later. Make sure this hole is not blocked.
3 Connect the plastic hose to the hose connector on back of the unit. Slide-in the hose
from right to left until it is locked in place.
7
Plastic Pin
Hole for Plastic Hose
=
Note: Do not install the window
bracket to your window. This step is
required only to adjust it to the
size of your window. The bracket
should be removed from the window
after the size is adjusted.