Tabla de contenido
Idiomas disponibles
Idiomas disponibles
W
-I
I
-E
C
ALK
N
NSTALLATION
LECTRICAL
ONNECTIONS
WALK-IN INSTALLATION
Electrical Connections
WALK-IN COOLER OR FREEZER WITH A SINGLE INTERIOR
LIGHT MOUNTED ON THE DOOR SECTION
CAUTION: ELECTRICAL CONNECTIONS TO THE WALK-IN MUST
COMPLY WITH APPLICABLE PORTIONS OF THE NATIONAL
ELECTRICAL CODE AND ANY OTHER ELECTRICAL CODES
THAT MAY HAVE JURISDICTION OVER THE INSTALLATION!
A dedicated electrical power supply circuit for the walk-in is
recommended.
WARNING!
DISCONNECT THE SELECTED POWER SUPPLY
CIRCUIT AND ATTACH A TAG TO THE DISCONNECT SWITCH
INDICATING THAT THE CIRCUIT MUST NOT BE ENERGIZED
WHILE SOMEONE IS WORKING ON THE LINE.
WIRING
The cooler or freezer door panel contains several electrical
components that were prewired at the factory. They include the
anti-condensate door opening heater, the pilot light/switch and vapor
proof, incandescent interior light mounted on the door panel. NOTE:
It is the electrical contractor's responsibility to provide the
necessary wiring, connections, conduit and fittings to complete
the hook-up.
The base for the vapor proof light fixture is the junction box which
contains the electrical leads that are prewired to the electrical
components contained in the door section. Determine exactly where
the power is to be brought into the junction box.
Affixed to the interior of the door section is a label which describes
the electrical characteristics and the energy consumption described
in watts and amperes.
The total energy requirement for a walk-in includes one (1) 100 watt
incandescent lamp. This information is useful in determining wire
sizes. The light bulb is not furnished.
© 2008 Nor-Lake 4/08 PN 121428
17
Tabla de contenido
