Accessories And Spare Parts En; Clean The Electrodes As Well As The; Space Between The Electrodes With A; Pleated Filter - Flex VCE 45 H AC Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Dust comes out while vacuuming
 Check for proper installation of the flat

pleated filter.

 Replace the flat pleated filter.
Automatic shut-off (wet vacuum
cleaning) does not react
 Clean the electrodes as well as the

space between the electrodes with a

brush.
 Continuously check the filling level in
case of non-conductive liquid.
Horn sounds
 Set the rotary switch to the correct suc-
tion hose cross-section.
 The safety filter sack must be replaced
when it is full and the minimum volume
flow is fallen short of.
Automatic filter cleaning is not
 Suction hose is not connected.
Automatic filter cleaning cannot be
switched off
 Inform Customer Service
Automatic filter cleaning cannot be
switched on
 Inform Customer Service
Disposal
At the end of its lifetime the appliance is to
be disposed of according to the statutory
provisions.
24
working
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
Accessories and Spare Parts
Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
Order No. 369.845
Name
Elbow (plastic)
Suction pipe
(metal)
Crevice nozzle
Floor nozzle
Insert the rubber lips of the floor nozzle
(wet vacuuming).
Illustration
 Remove the brush strips.
 Install the rubber lips.
Note: The structured side of the rubber lips
must point outwards.
– 8
EN
Warranty
Cleaning kit
Order No.
297.038
300.691
259.627
300.659
Piece
1
2
1
1
Tabla de contenido
loading

Tabla de contenido