Hama MyVoice2000 Instrucciones De Uso página 9

Hinweis - Connection impaired
After the headset and terminal device have been paired,
a connection is established automatically. If the Bluetooth
connection is not established automatically, check the following:
• Check the Bluetooth settings of your terminal device to see
whether MyVoice2000 is connected. If not, repeat the steps
listed under 5.1 Bluetooth pairing.
• Check whether obstacles are impairing the range. If so, move
the devices closer together.
• The performance can also be affected by a weak battery.
5.3. Multi-pairing
• The headset can be paired with two terminal devices at once so
that, for example, you can use a private and a business mobile
phone simultaneously.
• To begin with, activate Bluetooth only on the first terminal device
that you wish to pair.
• Pair the first terminal device with the headset as described in 5.1
Bluetooth Pairing.
• Switch off the headset as described in 5 Operation (Switching
off).
• Activate Bluetooth on the second terminal device.
• Press and hold the multifunction button (1) for approx. 8
seconds until the status LED (3) begins to alternate red and blue.
The headset is searching for a Bluetooth connection.
• Continue as decribed in 5.1 Bluetooth Pairing.
• Once the second terminal device is connected, open the Bluetooth
settings on the first terminal device and select MyVoice2000.
• Now both terminal devices are connected to the headset.
8