Electric Connection; Electrical Data; Electric Connection Of The Pressure Switch - S&P CACB-N Manual Del Usuario

4. ELECTRIC CONNECTION

The electric connection must be made by a qualifi ed person.
The motor will be supplied only in 230 V / 50 Hz single-phase power (see the data label glued to
EN
the box).
The electric power supply must conform to the current regulations of the country.
Do not forget to connect the earth.
The motor is equipped with a PTO. Its connection is made by independent wiring.
Warning: The motor connection must conform to the electric schematic diagram glued to the box.

4.1. ELECTRICAL DATA

Model
CACB-N 05
CACB-N 08

4.2. ELECTRIC CONNECTION OF THE PRESSURE SWITCH

Electric schematic diagrams
Single-phase 3-speed fan that allows adapting the performance of the equipment to the needs of
the installation.
Electrical schematic diagram of the CACB-N below.
14
Speed
Speed 1
Speed 2
Speed 3
Speed 1
Speed 2
Speed 3
al luminosa Se
Normal running
uncionamien- de
conditions signal
2
orrecto to
indicator
Default signal al luminosa de Se
ría av
1
Max.
current
(A)
0,38
0,33
0,26
0,77
0,56
0,41
indicator
N 1
Alimentación
Power supply
conforme a la
conform to the
norma NF C15-100
current regulations
Max. Power
power supply
(W)
90
76
57
180
122
86
Switch status at rest
2
2
L
Switching point for a ΔP
pressure measurement
> threshold ΔP0 of the
pressure switch setting
(V)
230
230
230
230
230
230
1