SATA SATAjet 1000 A RP Instrucciones De Servicio página 74

Operating Instructions for jet 1000 A RP, B RP, K RP Extensions
5. Assembly, installation and disassembly
5.1. Standard nozzle (0°)
Round/flat fan [1-9]
When using extensions, the spray jet cannot be variably adjusted to the
object being painted. A round/flat fan pattern is only possible using the
sealing ring [1-9] (# 154914):
■ Without sealing ring = flat fan
■ With sealing ring = round fan
Assembly
■ Coat external thread of air pipe module [1-1] with Loctite 276.
■ Thread together air tube modules [1-1] and [1-2] all the way and
tighten.
■ Coat external thread of paint tube module [1-4] with Loctite 276.
■ Thread together paint tube modules [1-3] and [1-4] all the way and
tighten.
■ Coat external thread of paint needle module [1-6] with Loctite 276.
■ Thread together paint needle modules [1-5] and [1-6] all the way and
tighten.
Attaching to paint spray gun
■ Thread paint tube [1-10] into paint spray gun and tighten with universal
wrench [1-14] .
■ Carefully slide air tube [1-13] over paint tube.
■ Use adapter [1-12] to thread air tube onto paint spray gun and tighten.
■ Thread paint nozzle [1-7] into paint tube and tighten with universal
wrench.
■ Thread air nozzle [1-8] onto air tube and tighten.
■ Slide paint needle [1-11] into paint spray gun and attach as described
in the paint spray gun operating instructions.
Disassembling the paint spray gun
■ Pull paint needle [1-11] out of paint spray gun as described in the paint
spray gun operating instructions.
■ Unscrew air tube [1-13] from paint spray gun by way of adapter [1-11]
and remove carefully.
■ Use universal wrench [1-14] to unscrew paint tube [1-10] from paint
spray gun and remove carefully.
74