Horizone; Setting The Timer - De Dietrich DPI7684XT Guía De Utilización

2
•
USE
case you can enter the number
corresponding the desired power
setting directly (2.5.2). Pressing the
«0» key switches the hob off.
When switching on, you can go directly
to maximum power (apart from boost)
by pressing the "–" key for the zone.e .
Power presets
f
There are four
provide direct access to pre-set power
levels:
= power 2 - Keep warm
= power 10 - Simmer
= power 19 - Sear
BOOST = maximum power (2.5.3)
These power values can be modified,
except for BOOST.
Proceed as follows:
The hob must be switched off.
- Press and hold
to select it.
- Set the new power setting by pressing
on the + or - button.
- A beep will confirm your action after a
few moments.
Note: Power levels must be between
1 and 3 for
4 and 11 for
12 and 19 for

2.6 HORIZONE

tech
Horizone
The free zone is selected with touchkey
d
(2.6.1). The power and timer are
adjusted as for a normal cooking zone.
To switch the zone off, press and hold
d
key , a long beep sounds and the
displays go off or the "H" symbol
keys available that
or or
appears.
Pressing the touchkey in front of or
behind the zone deactivates the
function and transfers the settings to
the selected zone.

2.7 SETTING THE TIMER

Each cooking zone has a dedicated
timer. It can be used as soon as the
cooking zone is turned on.
To switch it on or change it, press the
timer touchkey
+ -
the or
numeric keypad
In this case you can enter the figures
for the desired time directly, one after
the other.
Pressing the «0» key switches off the
timer.
To make setting a very long time easier,
you can go straight to 99 minutes by
pressing the – touchkey.
At the end of cooking, the display
indicates 0 and a warning beep
sounds. To cancel this information,
press any button for the particular
cooking zone being used. Otherwise,
they will switch off after a few seconds.
To stop the timer during cooking, press
the + and - keys at the same time or
return to 0 using the - key or enter "0"
on the numeric keypad.
Independent timer
This function allows you to time an event,
without cooking.
- Select a cooking zone you are not using
(2.7.4).
h
- Press the
26
h
(2.7.1), and then
g
(2.7.2) or use the
o
(2.7.3).
.