CP Desoutter FAS 3000 Manual Del Usuario página 5

FAS 3000 FLOW CHART
SELECTING PARAMETER SETS
The FAS3000 has eight different parameter sets that can be used to store the qualification conditions for eight differing
fasteners. The parameter sets are referred to as sets A through H. The current parameter set can be selected using the
steps below:
Indicates the parameter set (A-H) that will
be used to qualify the fastener.
Use the arrow buttons on the keypad to
change parameter sets.
Allows external selection of parameter sets
with 15-pin sockets.
Do not use
Press this key to switch to the selected
parameter set.
Press this key to exit the menu option
without making the change.
Part no 2050479303
Issue no 02
Series no -
Date 12/2006
Page 5 / 218