CP Desoutter FAS 3000 Manual Del Usuario página 3

Ocultar thumbs Ver también para Desoutter FAS 3000:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
FAS 3000 FLOW CHART
OPERATION
Normal operation of the FAS3000 is depicted below. On power-up, the unit will display a series of identifiers, code
revisions, etc. and then remain on the "count» window. The count window displays the current parameter set and the
current number of fasteners completed toward a GROUP. Other statistics are also available to the operator without a key
or password by pressing the arrow keys on the keypad. These options are described below.
Power-up sequence
Parameter set
Product identification
Firmware revision numbers
Count
Pressing the left or right arrows will
advance the display to the next or
previous screen respectively.
During screen changes, a description of the
next value to be displayed will be shown
This number denotes the number of fasteners
to be completed to get a GROUP ACCEPT.
The TOTAL represents the number of
completed groups. If the total exceeds 9999,
the total will begin to scroll to show all five
digits. The max total is 65,535. After 65,535 is
reached, the total will reset to zero.
Number of sensors (1 or 2)
The count is the number of completed
fasteners in the batch. When the count equals
the batch, the count will go back to zero and a
GROUP ACCEPT output will be generated.
If this button is pressed, the
operator will be prompted for a
four-digit password before entering
the program menu.
momentarily.
The max group is 255.
Part no
2050479303
Issue no
02
Series no
-
Date
12/2006
Page
3 / 218
Tabla de contenido
loading

Tabla de contenido