CP Desoutter FAS 3000 Manual Del Usuario página 11

FAS 3000 FLOW CHART
SEQUENCING
The FAS3000 can be set to sequence through up to eight different parameter sets before issuing a GROUP ACCEPT.
Under SEQU in the program menu, the operator can choose the number of parameter sets to include in the sequence.
The FAS3000 will start in parameter set A. Upon completion of all the fasteners in group A, the FAS3000 will advance to
parameter set B and so on. The parameters in the sequence will have to be set up individually, i.e.: Auto-Cal, number of
fasteners in the group, etc. A GROUP RESET operation will also reset the sequence.
Part no 2050479303
Issue no 02
Series no -
Date 12/2006
Page 11 / 218
Use these buttons on the keypad to
select the number of parameter sets
in the sequence.
Press this key to save the change
and exit the menu option.
Press this key to exit the menu option
without making the change.