Technical Data; Noise/Vibration Information - Berner BACAG BL 12V Manual Original

OBJ_BUCH-2851-002.book Page 17 Monday, November 27, 2017 11:55 AM

Technical Data

Grinder
Art. No.
Rated voltage
Rated speed
Grinding disc diameter,
max.
Mounting hole diameter
Weight according to
EPTA-Procedure 01:2014
Protection class
Permitted ambient
temperature
– during charging
*
– during operation and
during storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product
are: Sound pressure level 75 dB(A); Sound power
level 86 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and un-
h
certainty K determined according to EN 60745-2-3:
Surface grinding (roughing): a
2
K=1.5 m/s .
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
1 609 92A 44P • 27.11.17
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
BACAG BL 12V
hands warm, organisation of work patterns.
344064
343774
Declaration of Conformity
V= 12
-1
min 19500
We declare under our sole responsibility that the
product described under "Technical Data" is in
mm 76
conformity with all relevant provisions of the direc-
mm 10
tives 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the
kg 0.70/0.89* following standards:
EN 60745-1:2009+A11:2010,
/ II
EN 60745-2-3:2011+A2:2013+A11:2014+
A12:2014+A13:2015,
EN 55014-1:2006+A1:2009+A2:2011,
°C 0...+45
EN 55014-2:1997+A1:2001+A2:2008,
EN 50581:2012.
°C –20...+50
Technical file (2006/42/EC) at:
BBP 12V x.xAh
Berner Trading Holding GmbH
BACP 10,8V
Bernerstraße 6
Li x.x Ah
74653 Künzelsau
BBC 12V
GERMANY
BACC 10.8 V Li
i.V. Bert Habets
Senior Director Continuous Improvements
02.11.2017, Berner Trading Holding GmbH
Bernerstraße 6
74653 Künzelsau
GERMANY
Assembly
2
=13.5 m/s ,
h
Battery Charging
Note: The battery supplied is partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before us-
ing your power tool for the first time.
The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the
charging procedure does not damage the battery.
The lithium-ion battery is protected against deep
discharging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the machine is
switched off by means of a protective circuit: The
inserted tool no longer rotates.
 Do not continue to press the On/Off switch af-
Observe the notes for disposal.
ter the machine has been automatically
switched off. The battery can be damaged.
English | 17