Idiomas disponibles
Idiomas disponibles
Failure Display and Inspection
If an abnormality comes up, the induction hotplate will enter the protective
state automatically and display corresponding protective codes:
Troubles
F0-F2
Fan failure.
Thermistor
F3-F8
failure.
Temperature sensor of
F9-FE
the IGBT failure.
E1-E2
Abnormal supply voltage.
E3-E4
Abnormal temperature.
Bad
E5-E6
radiation.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hotplate.
Possible reasons
component
hotplate
Please contact the supplier
Power on, and then restart after the
temperature around returns to be
normal.
Please contact the supplier.
Power on, and then restart after the
temperature around returns to be
normal.
Please contact the supplier.
Please
supply is normal.
Please contact the supplier.
Please inspect the pot.
Please restart after the hotplate
cools down.
Please contact the supplier.
Please restart after the hotplate
heat
cools down.
Please contact the supplier.
20
Solutions
inspect
whether
power
