Handset Settings; Base Station Settings - Swissvoice Aeris 146 Instrucciones

Aeris 146

Handset settings

Press Menu, select HS Settings and press Select.
•
• Select a function from the following list:
- Alarm - The activated alarm is displayed in standby mode
sounds for 30 seconds or can be deactivated immediately by pressing any key.
The volume is the same as for the ringtone.
- Audio Setup - Set the desired speaker/loudspeaker volume.
- Ring Setup -Select the desired ringer melody for internal and external calls.
- Tone Setup - Activate or deactivate the following options:
Key Tone - Every time a key is pressed, a brief beep is heard.
Range Alarm - A warning beep is sounded if you exceed the maximum range.
- Language - Choose the language for the display texts.
- HS Name - To better distinguish between handsets, you can give each handset a
name.
- Auto Answer - Just pick up the handset from the base to answer a call (without
pressing any key).
- LCD Contrast - Set the desired display contrast.
- Date & Time - Set the desired date and time format and enter date and time.
- Select Base - If your handset is registered with several base stations, you can
select the base station on which you want to operate the handset.
- HS Reset - To reset the handset.

Base station settings

The system PIN on delivery is 0000.
Press Menu, select BS Settings and press Select.
•
• Select a function from the following list:
- Terminate HS - Select the handset you want to deregister.
- Dial Mode - Tone: Normal dialling procedure on analog lines. Pulse: May be
required for connecting older telephone systems. Please refer to the relevant
documentation.
- Flash Time - Select Flash 1 (300 ms) = France or Flash 2 (100 ms) = UK /
Spain.
- Modify PIN - You can modify the PIN code (0000 on delivery).
- BS Reset - To reset the base station.
28
. The alarm
Aeris 146