4) Temperature setting of freezing chamber
Press temperature adjusting button of the freezing chamber
of freezing chamber and then each time a press of temperature adjusting button of the freezing chamber,
the temperature will be reduced
When the temperature is
be set at
-16℃
, and it circulates again and again.
5
) Mode setting
Press mode button
following regulation:
Super refrigerating
→
→super refrigerating
none
When super refrigerating mode
Exit super refrigerating
temperature set before super refrigerating mode.
When super freezing mode
Exit super freezing
set before super freezing mode.Time setting of super freezing:
After setting the super freezing
for 3 seconds, the display shows "48", which means that time of super freezing has been set at
48 hours. And press freezing temperature adjusting button
means that time of super freezing has been set at 6 hours.when the time arrives, it will exit the super
refrigerating mode automatically.
After setting the super refrigerating
and the super refrigerating mode will exit automatically when the time arrives.
When vacation mode
temperature of refrigerating c hamber is turned off,and the icon(OFF) shines.
6 Storage upon power failure
In case of power failure, the instant working state will be locked and maintained tiil re-electrification.
7 Opening warning and alarm control
When the refrigerator doors get open, the opening music will play. If the door is not closed in two minutes,
the buzzer will sound once every minute until the door is closed. Press any one button to stop the buzzer alarm.
8 Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though
the refrigerator may still have cold storage function with the following faults, the user shall contact a
maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.
Error code
Temperature sensor failure
E1
of refrigerating chamber
Temperature sensor failure
E2
of freezing chamber
Failure of defrosting sensor in
E4
refrigerating chamber
Failure of defrosting sensor in
E5
freezing chamber
1℃
;The temperature setting range for freezing chamber is
-24℃
, press the button again, and the temperature of freezing chamber will
to select different control mode. Control mode is cycled according to the
→super freezing
is set, temperature of refrigerating chamber will automatically set at 2 °C;
mode, temperature of refrigerating chamber will automatically return back to
is set, temperature of freezing chamber will automatically set at -24 °C;
mode, temperature of freezing chamber will automaticallyreturn back to temperature
mode, long press the freezing temperature adjusting button
mode, The super refrigerating time setting is 2.5 hours by acquiescence,
is set , temperature of freez ing chamber wi l l be automat ic ally set a t - 1
Error description
→super refrigerating and super freezing
.
Error code
E6
E7
EH
10
to change the setting tempe
-24℃~-16℃)
, the display shows "6", which
Error description
Communication error
Failure of ambient temperature
sensor
Failure of humidity sensor
.
→vacation
8
℃;the