Changing The Light; Starting; Energy Saving Tips - Orima ORC 670 X Libro De Instrucciones

the Light
2.3 Changing
Any replacement or maintenance of the LED lamps is intended to be made by
饭a饮ufa正tu干步干
the , its service agent or similar qualified person.

2.4 Starting

830mm
655mm
1058mm
1阳0°
1394mm

2.5 Energy saving tips

The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freeze too slowly may
lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
Before initial start, keep the refrigerator still for half an hour
before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
Spare enough space for convenient opening of the doors and drawers.
The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor
7