BLACK&DECKER KC9036 Manual De Instrucciones página 7

Before operating the tool,
make sure that you know
how to switch the tool off
in an emergency.
• Retain this manual for
future reference.
General
1. Keep work area clean
Cluttered areas and benches
can cause accidents.
2. Consider work area
environment
Do not expose the tool to
rain. Do not use the tool in
damp or wet conditions.
Keep the work area well lit.
Do not use the tool where
there is a risk of causing fire
or explosion, e.g. in the
presence of flammable liquids
and gases.
3. Keep children away
Do not allow children, visitors
or animals to come near the
work area or to touch the tool.
4. Dress properly
Do not wear loose clothing or
jewellery, as these can be
caught in moving parts.
Preferably wear rubber gloves
and non-slip footwear when
working outdoors. Wear
protective hair covering to
keep long hair out of the way.
5. Personal protection
Always use safety glasses.
Use a face or dust mask
whenever the operations may
produce dust or flying
particles. Wear ear protection
whenever the sound level
seems uncomfortable.
6. Do not overreach
Keep proper footing and
balance at all times.
7. Stay alert
Watch what you are doing.
Use common sense. Do not
operate the tool when you
are tired.
KC9036EUR.PM65
E N G L I S H
8. Secure workpiece
Use clamps or a vice to hold
the workpiece. It is safer and
it frees both hands to operate
the tool.
9. Connect dust extraction
equipment
If devices are provided for the
connection of dust extraction
and collection facilities,
ensure that these are
connected and properly used.
10. Remove keys and adjusting
wrenches
Always check that keys and
adjusting wrenches are
removed from the tool before
operating the tool.
11. Use appropriate tool
The intended use is described
in this instruction manual.
Do not force small tools or
attachments to do the job of
a heavy-duty tool. The tool
will do the job better and
safer at the rate for which it
was intended. Do not force
the tool.
Warning! The use of any
accessory or attachment or
performance of any operation
with this tool other than those
recommended in this
instruction manual may present
a risk of personal injury.
12. Check for damaged parts
Before use, carefully check
the tool for damage.
Check for misalignment and
seizure of moving parts,
breakage of parts, damage to
guards and switches and any
other conditions that may
affect its operation.
Ensure that the tool will
operate properly and perform
its intended function.
Do not use the tool if any part
is damaged or defective.
Do not use the tool if the
switch does not turn it on and
off.
7
7
25-06-2001, 14:53