Alarms; View Alarm Settings; Set Alarm; Activate Alarm - Oregon Scientific BAR636 Manual Del Usuario

ALARMS

This product is equipped with a 2-minute crescendo
alarm.

VIEW ALARM SETTINGS

Press . The alarm time and alarm status will show
in the Clock Area.

SET ALARM

1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press
change settings. Press

ACTIVATE ALARM

Press to activate or deactivate the alarm.
in the Clock / Alarm Area when the alarm is activated.

SILENCE ALARM

When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. To silence the alarm:
• Press SNOOZE to silence it for 8 minutes.
OR
• Press any key except SNOOZE to mute the alarm
and activate it again after 24 hours.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after 8
minutes.
or to
to confirm.
shows
6

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius with 70 to 75
percent accuracy. The weather forecast is always
displayed.
SUNNY PARTLY
CLOUDY

TEMPERATURE

This product can display current, minimum, and
maximum temperature information collected by the
remote sensors and main (indoor) unit.
Outdoor data is collected and displayed every 40 sec-
onds. Indoor data is collected and displayed every 10
seconds.

SELECT TEMPERATURE UNIT

° °
Slide the C / F switch into the desired location. The
switch is located in the main unit battery compartment.
The setting for the main unit overrides the remote
sensor setting.

SELECT CHANNEL NUMBER

Press CHANNEL to switch between sensors 1-3.
The icon shows the selected sensor.
KINETIC-WAVE
ICON
Designated Indoor Remote
Display Display Display
Channel 1
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEMORY.
NOTE For more information on the sensor see
"Remote Sensor THN122N" section.
CLOUDY RAINY
Remote Remote
Display Display
Channel 2 Channel 3