Minimum / Maximum Records; Moon Phase; Backlight; Reset System - Oregon Scientific BAR636 Manual Del Usuario

MINIMUM / MAXIMUM RECORDS

The MEMORY button is located in the main unit battery
compartment. Press MEMORY to toggle between
current, maximum (MAX) and minimum (MIN) records.
To clear the records, press and hold MEMORY for 2
seconds. A beep will sound to confirm that the memory
has been cleared.

MOON PHASE

The Calendar must be set for this feature to work, see
"Set Clock" section.
• Press or to view the moon phase for the next
or previous day.
• Press and hold or
years (2001 to 2099).
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent

BACKLIGHT

Press LIGHT to activate the backlight for 8 seconds.

RESET SYSTEM

The RESET button is located in the main unit battery
compartment. Press RESET when you change the
batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or clock).

SAFETY AND CARE

Clean the product with a slightly damp cloth and
alcohol-free, mild detergent. Avoid dropping the
product or placing it in a high-traffic location.
to scan quickly through the

WARNINGS

This product is designed to give you years of service if
handled properly. Oregon Scientific will not be
responsible for any deviations in the usage of the
device from those specified in the user instructions or
any unapproved alterations or repairs of the product.
Observe the following guidelines:
• Never immerse the product in water. This can cause
electrical shock and damage the product.
• Do not subject the main unit to extreme force, shock,
or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a long
period of time.
• Do not scratch the LCD display.
NOTE The technical specification of this product and
contents of this user guide are subject to change
without notice. Images not drawn to scale.

TROUBLESHOOTING

PROBLEM SYMPTOM
Calendar Strange date /
month
Clock Cannot adjust
clock
Cannot auto-
synchronize the
date and time
Temp Shows "LLL" or " Temperature is
HHH"
Remote Cannot locate
sensor remote sensor
Cannot change
channel
Data does not
match main unit
7
REMEDY
Change language
Disable clock
1. Adjust batteries
2. Press RESET
3. Manually activate
clock feature
out-of-range
Check batteries
Check location
Check sensors.
Only one sensor is
working
Initiate a manual
sensor search