CLOCK
The clock automatically synchronizes the current time
and date when it is brought within range of the radio
signal DCF77 generated from Frankfurt, Germany for
Central Europe (model BAR626) or MSF60 generated
from Rugby, England (model BAR626U).
NOTE The signals are collected by the main unit when
it is within 1500 km (932 miles) of a signal.
Initial reception takes 2-10 minutes, and is initiated when
you first setup the unit, and whenever you press RESET.
Once complete, the reception icon will stop blinking. The
icon is shown in the Clock Area.
STRONG SIGNAL
WEAK SIGNAL
To force a manual search for clock signals, press and
hold
for 2 seconds. If no signal is found, check the
batteries.
TURN CLOCK ON / OFF
Perform this step if you cannot receive clock signals.
Press and hold
for 2 seconds. Then, manually set
the clock following the "Set Clock" instructions (below).
The signal icon indicates that the clock feature is
ON. No icon means that it is OFF.
SET CLOCK / CALENDAR
You only need to do this if you have disabled the clock
feature (for example, if you are too far from or cannot
receive a signal).
1. Press and hold MODE for 2 seconds. The Clock Area
will blink.
2. Select the hour, minute, year, month, day, and day
of the week language. Press
the setting.
3. Press MODE to confirm.
The language options are (E) English, (F) French, (D)
German, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
ALARMS
This product is equipped with a 2-minute crescendo
alarm.
VIEW ALARM SETTINGS
Press
in the Clock Area.
NO SIGNAL
SET ALARM
1. Press
2. Press and hold
3. Select the hour and minute. Press
ACTIVATE ALARM
Press
in the Clock / Alarm Area when the alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. To silence the alarm:
If no button is pressed, the alarm will automatically
or
to change
silence after 2 minutes. It will then sound again after 8
minutes.
6
. The alarm time and alarm status will show
to switch to alarm display.
again for 2 seconds. The alarm
settings will blink.
change settings. Press
to activate or deactivate the alarm.
¥ Press SNOOZE to silence it for 8 minutes.
OR
¥ Press any key except SNOOZE to mute the alarm
and activate it again after 24 hours.
or
to
to confirm.
shows