Andis ORL Instrucciones De Uso Y Cuidado página 6

Ocultar thumbs Ver también para ORL:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
The ON/OFF switch on the trimmer must be in the OFF position for the battery to charge. The blue
light on the trimmer will fade in and out while charging. Note that the trimmer can be removed at any
time during the charging cycle without harming the trimmer or battery. Once the battery is fully
charged, the light on the trimmer (Figure I) will turn solid blue.
The trimmer has not been charged at the factory. Please charge the trimmer for 2 hours before
the first use for maximum performance.
You can keep the trimmer plugged into the charging stand or adapter when not in use. The charging
stand or adapter will maintain the battery at full charge. We recommend that the charging stand or
adapter be unplugged if the trimmer won't be used for seven or more days.
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance you know is working).
2. Make sure on/off switch on the trimmer is OFF.
3. Check to make sure adapter cord is plugged firmly into trimmer or charging stand. Twist the
adapter cord slightly to ensure good electrical connection.
4. If failure to charge still exists, return trimmer to Andis or an Andis authorized service station for
examination and repair or replacement.
CORDED OPERATION
If the trimmer powers OFF in the middle of a trimming job, the power cord can be attached to
continue use in corded operation. Plug the adapter cord directly into the bottom of the trimmer
(Figure J). When the trimmer is running with the adapter cord attached, the blue light will remain solid
ON to indicate strong power, even if the battery is not fully charged. The trimmer will charge at a
slower rate while in use with the cord attached.
TRIMMER INDICATOR LIGHTS
When the trimmer is running in a cordless
operation, a blue trimmer indicator light means the
battery has a strong charge. When the light turns
red (Figure I) the battery level is low and should be
recharged as soon as possible.
If the trimmer automatically powers OFF, move the
power switch to the OFF position and either charge
in the charging stand or plug in to cord to continue
trimming. The trimmer automatically powering off
protects the lithium-ion battery and is not a
malfunction. The trimmer will resume normal
operation when it is recharged or plugged in to its
power cord. The ORL trimmer, by design, will run
at full power until the battery is fully depleted.
NOTE: If trimmer automatically powers OFF
while in use, it may take 1-2 minutes to resume
normal operation after power cord is plugged in.
USING ATTACHMENT COMBS
(Some models do not have combs and sizes will
vary by kit)
Your trimmer may come with 4 attachment combs: 1/16", 1/8", 1/4" and 3/8" (Figure K). To use, slide
front of attachment comb over the teeth of the blade (Figure L). Snap comb down over back of blade
(Figure M). Different blade angles in relation to the skin, thickness and texture of the hair will vary the
cutting length.
6
TRIMMER INDICATOR LIGHT STATUS
Trimmer in Charging
Stand
Fully Charged
Charging
Trimmer in Use
(Cordless)
Full Charge
Low Charge
Trimmer in Use (Corded)
Running
OFF with Full Charge
OFF without full charge
Solid Blue
Blue Fade In and Out
Solid Blue
Solid Red
Solid Blue
Solid Blue
Blue Fade In and Out
Tabla de contenido
loading

Tabla de contenido