Andis ORL Instrucciones De Uso Y Cuidado página 5

Ocultar thumbs Ver también para ORL:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
collection. Contact your local government about disposal
practices in your area.
15. When discarding old batteries, cover battery terminals
with heavy-duty adhesive tape to prevent short circuits.
WARNING: Do not attempt to destroy or disassemble
trimmer or remove any of its components. Also, never
touch metal terminals with metal objects and/or body
parts, as short circuit may result. Keep away from
children. Failure to comply with these warnings could
result in fire or serious injury.
16. This appliance is only to be used with the power supply
unit provided with the appliance.
17. This appliance is only supplied at safety extra low voltage
corresponding to the marking on the appliance.
18. Keep the appliance dry.
SAVE THESE INSTRUCTIONS
REFER TO PAGE 2 FOR DIAGRAMS.
UNIVERSAL AC/DC POWER ADAPTER
The unit/charging stand is equipped with a universal AC/DC power adapter. Interchangeable input
plugs are included for use in most countries around the world (Figures A-F). Plugs may vary by model.
REMOVING INPUT PLUG:
1. Unplug AC/DC power adapter from wall outlet.
2. While pressing down on button located on input plug, gently push up on plug until it releases from
power adapter (Figure G).
REPLACING INPUT PLUG:
1. To replace input plug, align tabs on the AC/DC power adapter with slots on input plug (Figure G).
2. Gently push input plug into power adapter until it snaps into place.
OPERATING INSTRUCTIONS
• The battery is not intended to be replaced by the user.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely.
CHARGING TRIMMER USING CHARGING STAND
The AC adapter is intended for use with Andis model ORL lithium-ion trimmer battery with a rated
capacity of 4.5V
into a 120V AC outlet, or according to your local power standards. Plug the adapter cord into the
receptable on the back of the charging stand (Figure H). Place trimmer in the charging stand.
1.2A. Remove the trimmer and AC adapter from the carton. Plug the AC adapter
5
Tabla de contenido
loading

Tabla de contenido