Hardware Installation; Technical Specifications - Velleman CAMTVI7 Manual Del Usuario

4. Features
 weatherproof
 with B/W night vision (IR LEDs)
 1080P video signal
 vandal-proof bracket
5. Overview
Refer to the illustrations on page 2 of this manual.
1 IR LEDs
2 lens
3 light sensor
4 sunshield
6.

Hardware installation

Refer to the illustrations on page 2 of this manual.
 Choose a location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low
o
temperatures or excessive vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
o
or reflections (e.g. metal doors).
 Use the mounting bracket [5] to determine the location of the mounting
holes. Drill the holes and secure the bracket [5] using screws.
 Attach the camera to the mounting bracket [5] with the camera bolt [7].
 Connect the two wires for an analogue PAL signal; leave them
unconnected for a HD 1080P TVI signal.
 Connect the power connector [B] to the 12 VDC power supply (not incl.).
 Connect the BNC connector [A] to a monitor (not incl.).
 Point the camera towards the field of interest and tighten the position bolt.
 Manually adjust the zoom and focus with the screws [6].
7.

Technical specifications

IP rating
pick-up element
pixels
resolution
DSP
min. illumination
IR LEDs
IR-cut filter
max. IR projection distance
V. 02 – 10/02/2016
CAMTVI7/CAMTVI7W
IP66
1/2.9" Sony Exmor CMOS image sensor
1920 (H) x 1080 (V)
1080P video
Techpoint (TP2801) & Fullhan chip (FH8531)
0.001 lux
24
yes
20 m
4
5 bracket
6 zoom and focus adjust
7 camera bolt
©Velleman nv