Storing The Battery-Operated Lawn Mower; Storing The Battery And Charger; Repairs; Maintenance And Care - AL-KO COMFORT 38.5 Li Traducción Del Manual De Instrucciones Original

en
STORING THE BATTERY-OPERATED
LAWN MOWER
Storage
Fold the upper handle bar to save space
during storage
Always store the mower with the battery and
the safety key removed
Store the mower in a dry place and inacces-
sible to children and unauthorized persons
STORING THE BATTERY AND
CHARGER
CAUTION!
Risk of fire and/or explosion!
Do not store the machine in the vicinity
of naked flames or heat sources.
The battery is protected by a supply vol-
tage against overloading and can the-
refore remain connected to the mains
power for a lengthy period.
The optimum temperature for storing the
battery is between 0 °C and 25 °C.
Store the battery in dry, frost-protected loca-
tion with an ambient temperature of between
0 °C and +25 °C and in a charged state of
approximately 40 - 60%
Recharge the battery for approximately 2
hours after a 3-month storage period
Do not store the battery near metallic or acid-
containing objects - risk of short-circuiting!

REPAIRS

Repairs must only be carried out at AL-KO
service centers or authorized specialist firms.
Two avoid an imbalance the cutter unit and
the retaining screw must only be replaced as
a set.
20

Storing the battery-operated lawn mower

MAINTENANCE AND CARE

CAUTION!
Danger - risk of injury!
Always remove the safety key before
carrying out maintenance work!
Always wear work gloves when carrying
out maintenance on the cutter blade!
Non-balanced cutter blades cause se-
rious vibrations and damage the mower!
Repairs must only be carried out at AL-
KO service centers or authorized specia-
list firms!
Regularly check the grass catcher system for
correct function and wear
After mowing, thoroughly clean the mower
with a hand broom or a cloth. Contamination
left on the underside of the mower can impair
its proper function
Do not hose down the mower with water! Wa-
ter can damage the switch as well as the bat-
tery and the electric motor
Regularly check the cutter blade for damage.
Have the blunt or damaged cutter blades
sharpened or replaced only at an AL-KO ser-
vice center or authorized specialist firm. Re-
sharpened cutter blades must be balanced
The tightening torque of the blade screw is 15
Nm +5
Ensure that all nuts, bolts and screws are
tightened and that the machine is in a safe
operational state.
Let the motor cool down before storing the
machine in a closed room.
CAUTION!
Cutting blade and motor shaft may not
be aligned if damaged!
Professional inspection is necessary:
After running onto an obstacle
When the motor is blocked
When the cutter blade is bent
When the motor shaft is bent
When the battery is damaged, worn out
441600_a