Optional Accessories; Protecting The Environment - DeWalt D25902 Traducido De Las Instrucciones Originales


WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.

Optional Accessories


WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Accessory Maintenance (Fig. F)
Accessory maintenance at the right time guarantees optimal
results in application and a long and efficient accessory life.
Grind the chisels on grinding discs. Refer to Figure F for the
appropriate angles of the following chisels:
11
Spade-shaped chisel
12
Cold chisel
13 Pointed chisel
14
U-shaped chisel
15
Hollow chisel
16
Mortar chisel
17 Toothed chisel

WARNING: These chisels can be reground only a
limited number of times. If in doubt, contact your dealer
for recommendations.

WARNING: Ensure that the cutting edge does not show
discolouration caused by too much pressure. This may
impair the hardness of the accessory.

Protecting the Environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
WALT recommended
e
EngLIsh
23