Midland PMR446 Manual De Instrucciones página 9

MIDLAND BASE CAMP PMR446
A multi-task PMR446 transceiver
MIDLAND BASE CAMP is a PMR446 transceiver including the VHF MARINE BAND receiver
and AM/FM radio. MIDLAND BASE CAMP as been designed for being a multi-task equipment,
radio and transceiver, for communicating with other devices set to the same channel.
MIDLAND BASE CAMP is the ideal and daily time solution for all the outdoor activities, the
free time and why not, also for emergency and safety situations. As a matter of fact, BASE
CAMP has a built-in flashlight, and a built-in SOS Morse signal function, that allows the tran-
sceiver to send messages in code; moreover, the dynamo crank allows you to recharge the
radio during a power outage or anytime away from a power source. Through the USB jack it
is possible to recharge also other devices (mobile phone, iPod, mp3 players) by the dynamo
crank, AC or DC Adapter.
Its small size allows the user to realize radio communications also on the go.
MIDLAND BASE CAMP is equipped also with a handheld microphone for an easy and practical
use.
Main features:
• PMR446 transceiver
• VHF MARINE BAND receiver
• Alarm clock/AM/FM radio included
• SOS morse signals
• Handheld microphone
• Flashlight
• Dynamo crank battery charge capability
• Recharge USB jack
• Supplied with a 6V NI-MH rechargeable battery pack
• Working with alkaline batteries
• 2 Pin accessories jack
DESCRIPTION
DISPLAY
Your MIDLAND BASE CAMP keeps you constantly updated about its operational status through
a Liquid Crystal Display (LCD).
The symbols and their corresponding parameters that may appear, according to the operational
status of the device, are described as follows:
3 2 1
4
5
6
1. (TX) TRANSMIT - appears while you are transmitting a signal (PTT button pressed)
2. (RX) RECEIVE - means that the radio is receiving a signal.
3. (DW) - DUAL WATCH indicates the DUAL WATCH function is on.
4. (H)High (L) Low- TRANSMIT POWER LEVEL - indicates TX power setting (H&L) - only in
PMR BAND.
5. AM/PM - indicates that the clock is set in AM or PM.
6. CHANNEL NUMBER - indicates the channel selected (P1-P8 PMR, 1-69 LPD, and 1-88 MA-
RINE). It can also be used to display AM/FM receiver frequency and the clock setting.
7. AM/FM - indicates if the radio is in AM or FM receiving mode.
8. PRIVACY CODE - indicates the CTCSS/DCS privacy code selected by the user. It's also used
to display the AM/FM receiver frequency and the clock setting.
9. VOX - indicates if VOX mode is active.
10. EMG - emergency channel selected in MARINE BAND.
11. LOCK - indicates that the key lock mode is on (except BAND, battery source, light switch and
MONITOR button).
12. SCAN - indicates if the radio is in SCAN mode.
13. - indicates that the key beep tone of the radio is on.
14. -indicates the battery level.
15. (RGB)- ROGER BEEP - indicates that the ROGER BEEP tone is on.
16. -indicates that the alarm clock is activated.
17. - indicates that you are in MARINE mode.
18. CTCSS/DCS - indicates the selected CTCSS/DCS code.
- 9 -
7 10 9 11 13 14
15
12
8 18 17 16