Coff Ee Grinder Adjustment - Saeco XSMALL PLUS V2 ANT SIL SUP033R Instrucciones De Uso

Coff ee Grinder Adjustment
W a r n i n g ! T h e g r i n d e r
adjustment knob, inside the coff ee bean hopper, must be turned
only when the grinder is working. Do
not pour ground and/or instant coff ee
into the coff ee bean hopper.
Do not insert any material
other than coff ee beans into
the hopper. The grinder contains
moving parts that may be dangerous.
Therefore, do not insert fi ngers and/or
other objects. Only adjust the grinder
using the grinder adjustment key.
Turn off the machine by pressing the
ON/OFF button and remove the plug
from the socket before carrying out
any type of operation inside the coff ee
bean hopper. Do not pour coff ee beans
when the coff ee grinder is working.
The machine lets you make slight
adjustments to the coff ee grinder to adapt
it to the kind of coff ee used.
This adjustment should be carried out by
adjusting the pin on the inside of the coff ee
bean hopper; this pin must be pressed and
turned only with the grinder adjustment
key provided with the coff ee machine.
Press and turn the pin one notch at a time.
You must brew 2-3 coff ees before you will
taste a diff erence.
2
1
The reference marks inside the coff ee bean
hopper indicate the grind setting. There
are 5 different grind settings to choose
from with the following references:
1 - Coarse Grind
2 - Fine Grind
2
1
• 21 •
Adjusting the Brewed Coff ee
The machine allows you to adjust the
amount of brewed coffee according to your taste and/or the size of your cups.
Each time the "
are pressed and released, the machine
brews a pre-set amount of coffee. This
amount may be reprogrammed to your
taste. Each button may be individually
programmed for a specifi c brew setting.
As an example, the following procedure
describes the programming of the small
coffee button "
associated with espresso coff ee.
• Place a cup under the dispensing
• Press and hold down the "
• Release the "
At this point the button "
grammed; each time it is pressed and
released, the machine will brew the same
Blinking
amount of coff ee that was just program-
med.
Standby
The machine is designed for energy sa-
ving.
After 60 minutes of inactivity, the machi-
nes turns off automatically.
a rinse cycle, if a coff ee product has
been brewed.
To turn the machine on again, simply
press the ON/OFF button; in this case the
machine will go through the rinse cycle
only if the boiler is cold.
" or " " buttons
", which is normally
spout.
" button;
the " " light blinks during this
phase.
" button when the
amount of coffee in the cup reaches
the desired level.
" is pro-
Note: During the turning off
phase, the machine performs