Technical Data - Proxxon LHW/A Manual De Instrucciones

1 Key (Fig. 1)
1. Lock button
2. Rotational speed regulating knob with On/
Off switch
3. Protective guard
4. Gear head
5. Motor housing
6. Battery
7. Battery release button
8. Sanding disc
9. Charger

2 Technical data

Device:
Rotational speed:
Voltage:
Disc diameter:
Length:
Weight:
Noise generation:
General measuring
uncertainty:
Grip vibration:
Charger:
Mains voltage:
50/60Hz
Output voltage:
Charging current:
Battery:
Rechargeable lithium-ion
battery
Nominal/charging voltage: 10.8V/12.6V
Energy/Capacity:
Please note that the sound and vibration mea-
surements in particular have been performed
with Proxxon bits and cutters. When using
third-party brands we cannot guarantee com-
pliance with the statements given here!
max. 16.000/min
10.8 V
max. 50 mm
approx. 320 mm
approx. 800 g
≤ 78 dB (A)
K=3dB
2
≤ 2.5 m/s
100-240 V~,
12.6 V
2 A
28.19Wh/2.6Ah
3 INR 19/66
3 Scope of delivery
LHW/A (29815):
1 pc. Battery-powered
grinder LHW/A
1 pc. Charger
1 pc. Lithium-ion battery
1 pc. Operating instructions
1 pc. Safety guidelines
1 pc. Storage case
1 pc. High-grade corundum sanding disc (K 60)
1 pc. Fan sander (K 100)
1 pc. Cutting disc (fabric reinforced)
1 pc. Allen key
LHW/A (29817):
1 pc. Battery-powered
grinder LHW/A
1 pc. Operating instructions
1 pc. Safety guidelines
1 pc. High-grade corundum sanding disc (K 60)
1 pc. Fan sander (K 100)
1 pc. Cutting disc (fabric reinforced)
1 pc. Allen key
4 Commissioning and operation
Charging the battery (Fig. 2 and 3)
Caution!
Before starting up, read the warning instruc-
tions and the labels attached to the charger and
the battery!
• Do not disassemble the battery or break
the housing! Electrolytes could leak out and
cause injuries! If electrolyte gets into your
eyes, rinsethem with clean water and seek
medical atten-tion immediately!
• Protect battery from overheating! Defects
could be the result.
• Never short-circuit the battery! Strong cur-
rents could overheat the battery. Burns or
a defect could be the possible result. When
storing the batteries, ensure that the electric
contacts cannot establish a conductive con-
nection.
long-neck angle
long-neck angle
- 15 -