Description Of The Machine; Technical Data - Proxxon LWS Manual

All manuals and user guides at all-guides.com
c) Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools carefully. Check for
misalignment or binding of moving parts,
breakage or damage of parts and any other
condition that may affect the power tools
operation. If damaged, have the power tool
repaired by a qualified expert before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier
to control.
g) Secure the workpiece.
Use clamps or a vice to hold the workpiece. This
is safer than holding it with your hand, and also it
frees both hands to operate the equipment.
h) Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner specified for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous
situation. All unauthorized modifications to the
power tool are prohibited for safety reasons.
5.) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
b) Comply with maintenance instructions and
instructions on tool replacements.
c) Check mains lead of power tool regularly and
have it replaced by a qualified expert in case
of damage.
Key
1. Locking button
2. ON-OFF switch
3. Unit handle
4. Connection cable with mains plug
5. Protective guard
6. Grinding disc

Description of the machine:

The PROXXON long neck angle grinder LWS is the
ideal device for model making, tool making and mould
making and is also suitable, for example, for vehicle
repairs.
It can be used for deburring, roughening, fine grin-
ding, chamfering, paint removal, rust removal, cutting
small components and sharpening tools.
It can be used on steel, non-ferrous metals, glass,
wood and ceramics.
Flat gearhead manufactured from die cast aluminium.

Technical Data

Motor:
Voltage
50/60 Hz
Output power
Unit:
Rotational speed
Disc diameter
Length
Weight
Generated noise
Vibration at the handle
For use in dry environments only
Protection class II device
Please do not dispose
off the machine!
GB
220-240 V,
100 Watt
13000 rpm
50 mm
250 mm
approx. 700 g
≤ 70 dB (A)
≤ 2.5 m/s
2
- 9 -