Assembly - Attaching The Blades; Attaching The Blades To The Blade Brackets - Home Decorators Collection 51504 Guía De Uso Y Cuidado

Assembly - Attaching the Blades

1
Attaching the blades to the blade
brackets
□
Attach a blade (H) to blade bracket (G) by inserting the screws
(AA) into the holes in the blade and through the blade bracket
(G).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
H
G
Assembly - Attaching the Light
1
Attaching the light kit pan
□
Remove one screw (NN) from the black bracket below fan motor
assembly (E), loosen but do not remove the other two screws.
□
Push the light kit pan (F) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (F) clockwise.
□
Re-install the screw (NN) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
2
AA
12
Fastening the blade assemblies to
the motor
□
Insert the blade/ blade bracket assembly through the hole in
the side of center flywheel on the fan-motor assembly (E).
Align the two screw holes in the blade bracket with the screw
holes in the center flywheel and secure with screws (CC).
E
CC
G
E
F
NN