Technical Parameters; Environment Protection - GRAPHITE 59G243 Instrucciones De Uso

In case of excessive commutator sparking, have the technical condition of carbon brushes of the motor
checked by a qualified person.
REPLACEMENT OF CARBON BRUSHES
Replace immediately worn out (shorter than 5 mm), burnt or cracked motor carbon brushes. Always replace
both carbon brushes at a time.
Unscrew carbon brush covers (7) (fig. J).
Remove used carbon brushes.
Remove any carbon dust with compressed air.
Insert new carbon brushes (carbon brushes should easily move into brush holders).
Fix carbon brush covers (7).
After the carbon brushes are replaced, start the polisher with no load and wait 2–3 minutes until the
carbon brushes fit to the motor commutator. It is recommended to entrust replacement of carbon
brushes only to a qualified person. Only original parts should be used.
All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Input current frequency
Rated power
Range of idle rotational speed
Buffing-polishing wheel diameter
Spindle thread diameter
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure Lp = 90,9 dB(A) K = 3 dB(A)
A
Sound power Lw = 101,9 dB(A) K = 3 dB(A)
A
Vibration acceleration a
h
Do not dispose of electrically powered products with household wastes, they should be utilized in
proper plants. Obtain information on waste utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.

TECHNICAL PARAMETERS

Polisher
= 17,9 m/s 2 K = 1,5 m/s 2

ENVIRONMENT PROTECTION

Value
230 V AC
50 Hz
1300 W
1000 - 3000 rpm
180 mm
M 14
II
3,6 kg
2016
15