Intended Use; Technical Data; Before Starting The Equipment - EINHELL RG-EM 1536 HW Manual De Instrucciones

Ocultar thumbs Ver también para RG-EM 1536 HW:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
Anleitung_RG_EM_1536_SPK7:_
GB

4. Intended use

The lawn mower is intended for private use i.e. for
use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of 50
hours, during which time the equipment is primarily
used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.
Important. Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind, unless they have been expressly permitted by
the manufacturer.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
20
16.02.2012
8:22 Uhr
Seite 20

5. Technical data

Mains voltage:
Power input:
Motor speed:
Cutting width:
Cutting height adjustment:
Grass basket capacity:
L
sound pressure level:
pA
Uncertainty K
L
sound power level:
WA
Vibration at the handlebars:
Uncertainty K:
Protection class:
Weight:
Sound and vibration values were measured in
accordance with the standards EN ISO 3744:1995,
EN ISO 11201:1995 and EN ISO 20643:2005.
Reduce noise generation and vibration to a
minimum!
Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves.

6. Before starting the equipment

The lawn mower is delivered unassembled. The
complete push bar, the rear wheels and the grass
basket must be assembled before using the lawn
mower. Follow the operating instructions step-by-step
and use the pictures provided as a visual guide to
easily assemble the equipment.
Fitting the wheels (Figures 3a, b and 4)
Take the rear wheels (Figure 2/Item11) and mount
them on the axle as shown in Figure 3a. Then slide
the washer (Figure 2/Item 23) onto the axle and
fasten all parts with the supplied split pin (Figure
2/Item 22) as shown in Figure 3b. Finally, press the
wheel caps (Figure 2/Item 10) onto the wheels
(Figure 4).
230 V ~ 50Hz
1500 W
3,650 min
25-75 mm; 6 levels
40 liters
73.6 dB(A)
:
pA
96 dB(A)
≤ 2.5 m/s
1.5 m/s²
-1
36 cm
3 dB(A)
2
II /
13.5 kg
Tabla de contenido
loading

Tabla de contenido