Idiomas disponibles
Idiomas disponibles
support.dell.com
To install the inner rails to the sides of the system, perform the following steps.
!
&/ ! +1. ,
$
" #
$
1.
Place the system on its side (see Figure 1-18) on a piece of foam or cardboard (to
prevent damage to the system) while you install the inner rails to the sides of the
system.
*
' #'
2.
Secure each inner rail to the side of the chassis with three 10-24 x 0.375-inch pan-
head Phillips screws (see Figure 1-18).
!
"#
567
!
#
$
567$
1.
Pull the two interior slide assemblies out of the rack until they lock in the
extended position.
8
% !
# $
2.
Lift the system into position in front of the extended slides.
Grasp the system with one hand on the right side of the system and the other
hand on the left side of the system.
inner rail (2)
10-24 x 0.375-inch pan-
head Phillips screws (6)
Rack Installation Guide
1-21
