Led Indicators And Their Actions - Kingston DataTraveler 2000 Manual De Instrucciones

LED Indicators and Their Actions

LED LED State
Red – Fade Out
Red blinking
Green Solid
Green blinking
Green flickering
Blue Solid
Blue blinking
Red and Green
Red and Green
Green and
Green and
Red and Blue
Red and Blue
Red, Green
Document No. 480ADT2000.B00
blinking alternately
flickering together
Blue blinking together
Blue flickering together
blinking together
flickering together
& Blue blinking
Description
Locking down /incorrect PIN entry
Locked and awaiting factory default PIN or User defined
PIN entry
DT2000 is unlocked in User mode
When connected to a USB port, if Green LED blinks every
2 seconds, this indicates the drive is set as 'Read-Only'
DT2000 is unlocked in Admin mode
Connected to a USB port
Data exchange with host/changing user PIN/when not
connected to a USB port, indicates an Admin PIN exists
Factory reset or deleting files in Admin mode
Awaiting Admin PIN entry
User Options mode
Admin Options mode
When not connected to a USB port, indicates that both
User and Admin PINs have been set on the DT2000
Awaiting Admin PIN change
Drive has developed a fault. Please retry the command
and if the problem persists, contact technical support
www.kingston.com/support
DT2000
Page 7 of 30