Enable Read/Write Mode As User - Kingston DataTraveler 2000 Manual De Instrucciones

Enable Read/Write Mode as User

Restricted write- protect (read-only) access can be turned off with access restored to
read/write. To enable this mode, follow the steps in the table below.
Note: Only do these steps when DT2000 is disconnected from a Host device.
Admin can override User Read/Write settings by enabling/disabling Read/Write in Admin
Note:
mode.
Instructions
1. Unlock DT2000 with the User PIN
2. Enable Options by pressing the
KEY button 3 times (triple-click)
3. Within 10 seconds, enter the
number 7 (pqrs) followed by the
number 9 (wxyz) button (79)
4. 4. Press KEY button once
Document No. 480ADT2000.B00
LED LED Status
solid LED changes to
Red
indicating successful User PIN entry
and LEDs blink together –
Green Blue
awaiting new instructions in OPTIONS Mode
and LEDs continue to blink together
Green Blue
LED quickly fades out to a solid
Blue
when DT2000 is inserted into a USB port, the
LED blinks every two seconds
Green
indicating the drive is in Read/Write Mode
DT2000
solid LED
Green
-
Green
Page 11 of 30