Enable Options As User; Enable Read-Only Mode As User - Kingston DataTraveler 2000 Manual De Instrucciones

Enable Options as User

Options Mode allows you to perform different functions, such as enabling or disabling the DT2000 as
'Read-Only', setting a 'Timeout' automatic lock and determining the version of the device.
The table below illustrates how to access the Options Mode.
Note: Only do these steps when DT2000 is disconnected from a Host device.
Instructions
1. Press KEY button once
2. Within 10 seconds, enter the User
PIN (default - 11223344) to unlock
the DT2000
3. Press KEY button once
4. Press the KEY button 3 times
(triple-click)

Enable Read-Only Mode as User

The DT2000 has a read-only mode that restricts write access to the drive. To enable this mode, follow the steps
in the table below.
Note: Only do these steps when DT2000 is disconnected from a Host device.
Instructions
1. Unlock DT2000 with the User PIN
Enable Options by pressing the
2.
KEY button 3 times (triple-click)
3. Within 10 seconds, begin to press
number 7 (pqrs) followed by the
number 6 (mno) button (76)
Press KEY button once
4.
Once activated, access is limited to read-only until write protect is disabled.
We have applied a naming convention to make it easy for you to remember the keystrokes
Note:
for each optional setting. In the table, above we have used numbers that represent the 'first
letters' of the optional feature name. For example, Read-Only = 7 (pqrs) 6 (mno).
Document No. 480ADT2000.B00
LED
LED
LED State
&
Red, Green Blue
once and then the
to blink
LED will continue to blink
Red
solid LED changes to
Red
indicating successful User PIN entry
and LEDs blink together – awaiting
Green Blue
new instructions in OPTIONS Mode.
LED Status
solid LED changes to
Red
indicating successful User PIN entry
and LEDs blink together – awaiting
Green Blue
new instructions in OPTIONS Mode.
and LEDs continue to blink together
Green Blue
solid LED changing to
Red
When DT2000 is inserted into a USB port the
LED blinks every two seconds indicating
Green
the drive is in Read-Only Mode
DT2000
LEDs will flash together
LED will continue
Red
solid LED
Green
solid LED
Green
solid LED.
Green
Page 10 of 30