Portfolio 37346 Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
4. Wire connection guide:
Ground wire:
• For installation in the United States: Wrap
ground wire from outlet box around ground
screw on mounting bracket (I) no less than 2
in. from wire end. Tighten ground screw. If
fixture is supplied with a ground wire,
connect to outlet ground wire with a wire
connector (AA).
• For installation in Canada: If fixture is
supplied with ground wire, wrap ground wire
around ground screw on mounting bracket
(I). Tighten ground screw. Connect fixture
ground wire to outlet ground wire with the
wire connector (AA).
Supply wires:
• Connect the Neutral (White) supply wire from
the outlet box to the Neutral fixture wire
(White or Parallel Cord "D" shaped and
ribbed).
• Connect the Hot (Black) supply wire from the
outlet box to the Hot fixture wire (Black or
Parallel Cord round and smooth).
NOTE:
Fixture wires will either be:
• Black and White.
• Parallel Cord SPT-1 lamp wire with one
round smooth wire and one "D" shaped
ribbed wire.
Hardware Used
Wire Connector
AA
5. Pass fixture (A) over the long
machine screws (DD) protruding from the
mounting bracket (I) and secure in place
with threaded knobs (CC).
Hardware Used
Threaded
CC
Knobs
4
BARE COPPER,
OR GREEN
GROUND
SUPPLY WIRE
BLACK SUPPLY
WIRE
WHITE SUPPLY
WIRE
BLACK SUPPLY
WIRE
WHITE SUPPLY
WIRE
x 3
5 5
x 2
5
BARE COPPER,
AA
OR GREEN
GROUND
FIXTURE
BLACK FIXTURE
WHITE FIXTURE
OR
PARALLEL
FIXTURE CORD
(ROUND AND
SMOOTH)
PARALLEL FIXTURE
CORD ("D" SHAPED
AND RIDGED
I
CC
DD
A
Lowes.com/portfolio
WIRE
WIRE
WIRE
)