Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
IB520067ML
Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1
Instructions d'installation – LDA2B*LWTPD1/LDSQA2B*LWTPD1
Instrucciones de instalación de la luminaria LDA2B*LWTPD1/
LDSQA2B*LWTPD1
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this
product must be performed by a qualified electrician. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of
the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or
attempting any maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors. For Non-IC fixtures do not install insulation within 3
inches (76 mm) of any part of the luminaire fixture or in a way that may entrap heat.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property
damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind
that may arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
Note: Do not energize the LED Engine until the protective cover has been removed with the optic and lower trim
properly installed. Do not touch the surface of the LED as it may damage the light engine.
Note: This fixture weighs up to 15 Ibs.
When using electrical equipment, basic safety precautions should always be followed, including the following:
1.
This unit is for recessed mounting only. Do not use in hazardous locations nor near gas or electric heaters.
2.
Do not use this equipment for other than the intended use.
3.
Install only in accordance with National Electrical Code and local regulatory agencies' requirements.
WARNING
SAFETY INSTRUCTIONS
Brand Logo
reversed out of
black
INS #
INS #
Tabla de contenido
Manuales relacionados para Portfolio LDA2B Serie
Resumen de contenidos para Portfolio LDA2B Serie
- Página 1 Brand Logo reversed out of black IB520067ML INS # INS # Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 Instructions d’installation – LDA2B*LWTPD1/LDSQA2B*LWTPD1 Instrucciones de instalación de la luminaria LDA2B*LWTPD1/ LDSQA2B*LWTPD1 WARNING Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product must be performed by a qualified electrician.
-
Página 2: Standard Installation
Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 WITHOUT BATTERY BACKUP WITH BATTERY BACKUP Figure 1. INSTALLATION Plug Sensor Cable Here Standard Installation Consult plaster frame instructions for assemby into the ceiling. Install the smart sensor in the ceiling ensuring adequate sensor cable length. a. - Página 3 Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 D010TR-EM7EM14-LWTPD1 DE010-EM7-EM14-LWTPD1 DRIVER DRIVER GREY GREY PURPLE PURPLE WHITE STRIPED WHITE STRIPED BLUE WHITE BLUE WHITE BLACK STRIPED BLACK STRIPED BLACK BLACK BLACK BLACK J-BOX NON-IC ONLY J-BOX NON-IC ONLY HOUSING HOUSING UNSWITCHED SWITCHED UNSWITCHED SWITCHED BLK/OR WHT/BLK BLK/OR...
-
Página 4: Instructions De Sécurité
Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 AVERTISSEMENT Risque d’incendie, de décharge électrique, de coupure ou d’autres dangers- L’installation et la réparation de ce produit doivent être faites par un électricien qualifié. Ce produit doit être installé conformément au code d’installation applicable par une personne qui connaît bien la construction, le fonctionnement du produit et les dangers encourus. -
Página 5: Installation Standard
Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 INSTALLATION Installation standard Consultez les instructions du cadre à sceller pour un assemblage dans le plafond. Installez le capteur intelligent dans le plafond en vous assurant d’utiliser la bonne longueur de câble pour le capteur. Pour monter le capteur au travers de la tuile du plafond, faites passer les bras à... - Página 6 Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 D010TR-EM7EM14-LWTPD1 DE010-EM7-EM14-LWTPD1 CIRCUIT DE SORTIE CIRCUIT DE SORTIE ROUGE ROUGE GRIS GRIS VIOLET ROUGE VIOLET ROUGE BLANC DÉNUDÉ BLANC DÉNUDÉ BLEU BLANC BLEU BLANC À RAYURE NOIRE NOIR À RAYURE NOIRE NOIR NOIR NOIR NON-IC NON-IC SEULEMENT SEULEMENT BOITE DE JONCTION...
-
Página 7: Instrucciones De Seguridad
Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 ADVERTENCIA Riesgo de incendio, descarga eléctrica, cortes u otros riesgos de accidentes: La instalación y el mantenimiento de este producto deben ser realizados por un electricista calificado. Este producto debe ser instalado de acuerdo con el código de instalación correspondiente por una persona familiarizada con la construcción y operación del producto y los riesgos involucrados. -
Página 8: Instalación Estándar
Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 INSTALACIÓN Instalación estándar Consulte las instrucciones del marco de yeso para el armado en el cielo raso. Instale el sensor inteligente en el cielo raso, asegurando la longitud adecuada del cable del sensor. Para montar el sensor a través de la losa del techo, enrosque los brazos del resorte alrededor del sensor e introduzca el sensor por el orificio de 15/16 de pulgada en la losa. - Página 9 Installation Instructions – LDA2B*LWTPD1/LDSQA2B*LWTPD1 D010TR-EM7EM14-LWTPD1 DE010-EM7-EM14-LWTPD1 CONDUCTOR CONDUCTOR ROJO ROJO GRIS GRIS MORADO ROJO MORADO ROJO BLANCO PELADO BLANCO PELADO AZUL BLANCO AZUL BLANCO NEGRO PELADO NEGRO NEGRO PELADO NEGRO NEGRO NEGRO NON-IC NON-IC SOLO SOLO CAJA DE CONEXIONES CAJA DE CONEXIONES ALOJAMIENTO ALOJAMIENTO SIN CAMBIAR...
- Página 10 Warranties and Limitation of Liability Cooper Lighting Solutions provides a 5-year limited warranty on this LED lighting product. Refer to the complete warranty terms & conditions of sale at www.cooperlighting.com. Garanties et limitation de responsabilité Cooper Lighting Solutions offre une garantie limitée de 5 ans sur ce produit d’éclairage à DEL. Retrouvez toutes les modalités de vente et de garantie sur www.cooperlighting.com.