Idiomas disponibles
Idiomas disponibles
4
12. Remove the Integrated Power Module (IPM) cover by
pulling up on the cover tabs (7) and pivoting the cover
outward.
13. Remove the nut (2) from the IPM B+ terminal stud.
14. Remove the battery positive cable (3) from the IPM B+
terminal stud.
15. Using a suitable flat bladed tool, depress the three re
taining clips, lift the IPM straight up off of the bracket
tabs and access the underside wiring connectors.
16. Remove the connector marked "II" (1).
17. Access the wire terminals by disengaging the retain
ing tabs (1) on rear cover of the connector.
Oct 19, 2009
K6860909
