Idiomas disponibles
Idiomas disponibles
21. Connect antenna cables to the radio.
22. Connect the electrical harness connector to radio.
23. Position radio to instrument panel. Install and tighten
the mounting fasteners.
24. Install the radio bezel.
25. Position the kit supplied Wireless Ignition Node (WIN)
(2) into the instrument panel.
26. Connect the instrument panel wire harness connector
to the WIN connector receptacle.
27. Connect the WIN antenna module coaxial cable con
nector to the WIN connector receptacle.
28. Position the WIN into the instrument panel.
29. Install and tighten the four screws (3) that secure the
WIN to the instrument panel support structure (1).
Tighten the screws securely.
30. Position the bezel around the ignition switch on the in
strument panel, then press firmly and evenly on the
bezel until it snaps into place.
NOTE: On vehicles equipped with the optional export
premium Vehicle Theft System, when the Wireless Ig
nition Node (WIN) is replaced with a new unit, the shaft
lock module MUST also be replaced.
Oct 19, 2009
11
K6860909
