About This Document; General Safety Instructions - Bosch Rexroth BT356 Manual De Instrucciones

24/124 Bosch Rexroth AG
1

About this document

This manual contains important information
on the safe and appropriate assembly,
transport, commissioning, operation,
maintenance, disassembly and simple
troubleshooting of the BT356 card rack.
Read these instructions completely,
especially chapter "2 General safety
instructions" on page 24, before working
with the BT356 card rack.
Related documents
The BT356 card rack is a system component.
Also observe the instructions for the other
system components.
Also observe the generally applicable, legal
or otherwise binding regulations of European
or national legislation and the rules for the
prevention of accidents and for
environmental protection applicable in your
country.
2 General safety
instructions
The BT356 card rack has been
manufactured according to the accepted
rules of current technology. There is,
however, still a danger of personal injury or
damage to equipment if the following general
safety instructions and the warnings before
the steps contained in these instructions are
not complied with.
• Read these instructions completely and
thoroughly before working with the BT356
rack.
• Keep these instructions in a location where
they are accessible to all users at all times.
• Always include the operating instructions
when you pass the BT356 card rack on to
third parties.
BT356 | 3 609 929 B68/2008-11
Intended use
The BT356 card rack is a component in
terms of the machine directive 98/37/EC and
is not a ready-for-use machine. The product
is exclusively intended for being integrated in
a machine or system or for being assembled
with other components to form a machine or
system. The product may be commissioned
only if it is integrated in the machine/system
for which it is designed and the machine/
system fully complies with the EC machine
directive. Observe the operating conditions
and performance limits specified in the
technical data.
The BT356 card rack is a work appliance and
not designed for private use.
Intended use includes having read and
understood these instructions, especially the
chapter "2 General safety instructions".
The card rack is intended for use in industrial
environments (emission class A), i.e.
• it is not designed to be directly connected
to the public low-voltage power supply,
• or to medium or high-voltage networks via
a transformer.
In residential areas, business and commercial
areas as well as in small businesses, class A
appliances may only be used if they do not
adversely affect other appliances. In the
event of radio interference, operators could
be obliged to provide suitable measures to
remedy the interference.
Improper use
Any use of the BT356 card rack other than
described in chapter "Intended use" is
considered as improper.
Personnel qualifications
Assembly, commissioning and operation,
disassembly, service (including maintenance
and repair) require basic electrical and
mechanical knowledge, as well as
knowledge of the appropriate technical