Tumi EARBUDS Manual Del Usuario página 14

WARNINGS, CAUTIONS & LEGAL INFORMATION
To reduce the risk of fire or electric shock, do not expose the
Tumi Wireless Earbuds to rain or moisture while charging. The
Tumi Wireless Earbuds should not be exposed to dripping or
splashing, and objects filled with liquids, such as vases, should
not be placed on or near it while being charged or charging other
devices. As with any electronic products, use care not to spill
liquids into any part of the product. Liquids can cause a failure
and/or a fire hazard. The power supply must be used indoors only.
Make no modifications to the product or accessories. Unauthorized
alterations may compromise safety, regulatory compliance, and
system performance, and will void the warranty. Do not place
any flame sources, such as lighted candles, on or near the Tumi
Wireless Earbuds. The Tumi Wireless Earbuds contains small parts
that may be a choking hazard and is not suitable for children under
age 3. Do not continue charging the battery if it does not reach
full charge within the specified charging time. Overcharging may
cause the battery to become hot, rupture, or ignite. If you see
any heat deformation or leakage, properly dispose of the battery.
Do not attempt to charge the battery in temperatures outside
the range of 32°-104°F (0°-40°C). If the battery begins to leak, do
not allow the liquid to come in contact with your skin or eyes. If
contact has been made, wash the affected area with plenty of
water and seek medical attention immediately. Do not expose the
product or battery to excessive heat, including direct sunlight or
fire and storage or use inside cars in hot weather, where it can be
exposed to temperatures in excess of 115°F (60°C). Doing so may
cause the battery and power supply to generate heat, rupture,
or ignite. Using the product in this manner also may result in a
loss of performance and a shortened life expectancy. Extended
exposure to direct sunlight may damage the external appearance
and material qualities. Do not step on, throw, or drop batteries or
the power supply or device, or expose them to a strong shock. Do
not pierce, crush, dent, or deform the batteries or power supply
in any way. If either becomes deformed, properly dispose of it.
Do not short-circuit batteries. Do not attempt to service the Tumi
Wireless Earbuds yourself. Opening or removing covers may
expose you to dangerous voltages or other hazards and will void
the manufacturer's warranty. To prevent risk of fire or electric
shock, avoid overloading wall outlets, extension cords, or integral
convenience receptacles. Your Bluetooth device (mobile phone,
music player, tablet, laptop, etc.) must support the A2DP Bluetooth
profile in order to work wirelessly with your new Tumi Wireless
Earbuds. The A2DP profile is supported by most recent mobile
products with built-in Bluetooth capability. Please refer to your
device's user manual for details and instruction regarding the
Bluetooth profiles it supports.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the