Service Information - Oster 76105 Manual De Instrucciones

INSERTING THE COMB ATTACHMENT
• Insert the cutting edge of the blade into the comb attachment.
• Snap it tight at the back end of the blade by pushing down on the Guide
Comb Attachment.
REMOVING THE COMB ATTACHMENT
• Push up on the Guide Comb Attachment until it releases from the
metal blade.
• Continue lifting the Comb Attachment away from the cutting edge of the
blade until the Comb Attachment is free.
WARNING
CONTAINS NICKEL-METAL HYDRIDE BATTERIES.
BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
1. The battery must be removed from the appliance before it is scrapped.
2. The appliance must be disconnected from the supply mains when removing the
battery.
3. The battery is to be disposed of safely.
Disposal in E.U. countries
Do not dispose of the appliance with domestic refuse. As part of the E.U.
Directive governing the disposal of electric and electronic appliances,
please discard unwanted batteries and/or battery operated products at
your local recycling center. Correct disposal will ensure environment
protection and prevent a potential harmful impact on people and the
environment.
For battery removal or maintenance and/or repair of this appliance
please contact an Authorized Service Center.
Disposal in non-E.U. countries
Please dispose of the appliance at the end of service life in an environmentally
friendly manner.

SERVICE INFORMATION

How and Where to Get Service
INFORMATION • DO NOT DESTROY • READ CAREFULLY
The foundation of our business has been built upon the principle of service
to the user, both in designing superior products and in keeping them in
condition to give long-lasting use. That is why we back up our reputation
for manufacturing top-quality products by providing the finest service
facilities possible for adjustment and repairs, when necessary. Please retain the
original packaging materials and carton, if possible, to facilitate the
packaging of the product if service is required.
8
HOW TO GET SERVICE WHEN YOU NEED IT
To locate your closest distributor, please go to: WWW.OSTERPRO.COM
1. Once you have located a Service Station, take your product there. To make
packaging the product easier, use the original packaging materials and carton
if you have them.
2. If it is necessary to ship the unit to the Service Station:
a. Pack it carefully in a good carton with plenty of crumpled paper or other
padding around it. Tape or tie the carton securely.
b. The warranty does not cover damage in transit. Carefully address
the package to the nearest Service Station. Don't forget your name and
return address, including postal zip code.
c. Your Post Office will tell you the proper amount of postage and can
insure the package against loss.
3. If returning a clipper, include blades.
4. When ordering Parts or Accessories specify the Service number
(or Model No. and the Series Letter) indicated on your product.
LIMITED WARRANTY
This product is warranted for one year from date of purchase to be free
of mechanical and electrical defects in material and workmanship. The
manufacturer's obligation hereunder is limited to repairing such products
during the warranty period, provided the product is sent prepaid to an
Authorized Service Station. This warranty does not cover normal wear of parts
or damage resulting from any of the following: Negligent use or misuse of the
product, normal wear and tear, damage, Acts of God, use on improper
voltage or current, use contrary to operating instructions, or disassembly,
repair or alteration by any person other than an Authorized Service Station.
Return of the Owner Registration Card is not required for warranty coverage.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state, province to province or jurisdiction to
jurisdiction. No other warranty is provided and to the extent prohibited by
applicable law, any implied warranty of merchantability or fitness for a
particular purpose is limited to the duration of this warranty and the company
shall not be responsible for incidental or consequential damages.
In accordance with the European Directives on Low Voltage (73/23/EEC as
amended by 93/68/EEC) and Electromagnetic Compatibility (89/336/EEC as
amended by 93/68/EEC), the CE-marking has been affixed on the equipment.
The following importer and distributor keeps the conformity
declaration on file: Oster GmbH, Gerbermühlstrasse 32, D-60594 Frankfurt am
Main,[email protected], phone + 49 (0) 69 410 120.
9