By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to tune in a specific
station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorised on the
number buttons.
•Change the disc.
Other operations
Rotate the VOL control to
adjust the volume.
Press (ATT) to
attenuate the
sound.
Press (OFF) to turn
off the unit.
Press (LIST) to:
• Display the memorised names.
• Display the programme type.
Press (REC) to record a voice memo.
Press (PLAY) to play back the
voice memo.
Press and hold (PLAY) to erase
the voice memo.
Changing the operative direction
The operative direction of controls is factory-
set as in the illustration below.
To increase
To decrease
If you need to mount the rotary commander on
the right side of the steering column, you can
reverse the operative direction.
Press (SOUND) for two seconds while
pushing the VOL control.
Tip
You can control the operative direction of controls
with the unit (page 26).
Press (SOUND) to
adjust the volume
and sound menu.
Press and hold
(TALK) to select a "V
Drive" box for
registration.
Press to :
• Register a vocal
phrase.
• Request a
registered source.
25
EN