Technical Data; Definitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt DW712 Traducido De Las Instrucciones Originales

MITRE SAW
DW712, DW712N
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
reliable partners for professional power tool users.

Technical Data

Voltage
(UK & Ireland only)
Type
Power output
Current input (230V)
Current input (115V)
Blade diameter
Blade bore
Max. blade thickness
Blade speed
Max. crosscut capacity at 90/90°
Max. mitre cut capacity at 45˚
Max. depth of cut 90˚
Max. depth of bevel cross-cut 45˚
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 70 mm
Resulting height at max. width 300 mm
45° mitre left
Resulting width at max. height 70 mm
Resulting height at max. width 212 mm
45° mitre right
Resulting width at max. height 70 mm
Resulting height at max. width 212 mm
45° bevel left
Resulting width at max. height 50 mm
Resulting height at max. width 300 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 254 mm
Blade stopping time
Dust collection efficiency
Weight
Noise values and vibration values (triax vector sum) according to EN61029
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
WALT one of the most
e
DW712 DW712N
QS QS
V 230 230
Fuses
V 230/115 230/115
6 4
W 1600 1600
NOTE: This device is intended for the connection to a power supply
A 8 8
system with maximum permissible system impedance Zmax of 0.28 Ω
at the interface point (power service box) of user's supply.
A 16 16
mm 216 216
The user has to ensure that this device is connected only to a power
system which fulfils the requirement above. If necessary, the user can
mm 30 30
ask the public power supply company for the system impedance at the
mm 1.8 1.8
interface point.
min 3500–4600 5400
-1

Definitions: Safety Guidelines

mm 300 x 70 300 x 70
mm 212 212
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
mm 70 70
mm 50 50
left 50˚ 50˚
right 60˚ 60˚
left 48˚ 48˚
right 2˚ 2˚
mm 300 300
mm 70 70
mm 212 212
mm 70 70
mm 212 212
EC-Declaration of Conformity
mm 70 70
MACHINERY DIRECTIVE
mm 300 300
mm 50 50
MITRE SAW
mm 65 65
DW712, DW712N
s < 10 < 10
D
mg/m < 2.0 < 2.0
are in compliance with:
kg 21 21
2006/42/EC, EN61029-1:2009 +A.11:2010, EN61029-2-11:2012
+A11:2013
These products also comply with Directive 2014/30/EU and 2011/65/
EU. For more information, please contact D
dB(A) 91 91
address or refer to the back of the manual.
dB(A) 104 104
The undersigned is responsible for compilation of the technical file and
dB(A) 2.9 2.9
makes this declaration on behalf of D
m/s 2.1 2.1
2
m/s 1.5 1.5
2
Markus Rompel
Director Engineering
D
D-65510, Idstein, Germany
20.04.2016
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT declares that these products described under Technical Data
e
e
WALT, Richard-Klinger-Straße 11,
e
E NG L I SH
WALT at the following
e
WALT.
27