Inspecting And Replacing Anode(S) - Yamaha Z250D Manual Del Propietário

4-24
NOTE:
For disposal of used oil consult your
Yamaha dealer.
6) With the outboard motor in a vertical
position, and using a flexible or pressur-
ized filling device, inject the gear oil into
the gear oil drain screw hole.
601033
Gear oil grade and capacity:
See "Specifications" in this chapter.
7) When the oil begins to flow out of the
oil level plug hole, insert and tighten the
oil level plug.
8) Insert and tighten the gear oil drain
screw.
Z250F
9) Securely install the cooling water inlet
001682
covers on both sides of the gear case
using the bolt and nut removed earlier.
EMU01462
INSPECTING AND REPLACING
603024
ANODE(S)
Yamaha outboard motors are protected
from corrosion by sacrificial anodes.
Check the anodes periodically. Remove
scales from the surfaces of the anodes.
For inspection and replacement of anodes,
consult a Yamaha dealer.
cC
Do not paint anodes, as this would ren-
der them ineffective.
E