Olr_Ibpellqfkd - ResMed HumidAire 2i Manual Del Usuario

q

olr_ibpellqfkd

+H VJGTG KU C RTQDNGO VT[ VJG HQNNQYKPI UWIIGUVKQPU +H VJG RTQDNGO ECPPQV DG UQNXGF
EQPVCEV [QWT GSWKROGPV UWRRNKGT QT 4GU/GF &Q PQV CVVGORV VQ QRGP VJG WPKV
9#40+0)
!
5GTXKEG CPF TGRCKT UJQWNF QPN[ DG RGTHQTOGF D[ CP CWVJQTKUGF UGTXKEG CIGPV 7PFGT
PQ EKTEWOUVCPEGU UJQWNF [QW CVVGORV VQ UGTXKEG QT TGRCKT VJG WPKV [QWTUGNH
mêçÄäÉã
Device not working
(no display on LCD
screen)
Heater plate light not
lighting up
Leaking water
chamber
mçëëáÄäÉ=`~ìëÉ
Power cord is not plugged
in properly.
Device not switched on.
Faulty power outlet.
The Front key on the device
has not been pressed.
Control dial is in the OFF
position.
The water chamber may be
damaged or cracked.
The lid may not be on
correctly.
Water chamber seal may be
twisted.
Side catches are not
engaged properly.
The tub plate is incorrectly
fitted.
pçäìíáçå
Check that the power cord is plugged
firmly into the power outlet.
Check that the switch at the back of the
device is in the ON position.
Try another power outlet.
Press the Front key on the
device to activate the heater plate.
Turn the control dial up from the OFF
position.
Contact your supplier for a replacement.
Press the lid down firmly.
Make sure the seal is seated properly
inside the water chamber.
Make sure the two side catches are
engaged properly.
Make sure the tub plate is fitted correctly.
q
olr_ibpellqfkd
NV