Service And Maintenance - PYD Electrobombas KBZ Serie Manual De Instalación Y Mantenimiento

MANUAL DE INSTALACIÓN Y MANTENIMIENTO
SERIE KBZ

7. SERVICE AND MAINTENANCE

Pump must be disconnected from teh electric power supply before proceeding to do any service
or maintenance.
For a complete overhaul of the pump, please get in touch with your dealer. Service should only be
performed by a qualified electrician.
1) Pump must be disconnected from the electric power supply before proceeding to do any service
or maintenance.
2) Pump should be inspected at regular intervals for wear.
3) More frequent inspections are required if the pump is used in a harsh environment, such as pum-
ping abrasive solids or high / low PH water.
4) Preventive maintenance should be performed to reduce the chance of premature failure.
5) Worn impeller wear plates and lip seals should be replaced.
6) Cut or craked power cords must be replaced. (never operate a pump with a cut, cracked or da-
maged power cord.)
7) Seal oil should be changed at least twice a year.
8) Maintanance should always be done when taking a pump out of service before storage.
9) After a longer period of storage, the pump must be inspected and the impeller must be rotated by
hand before the pump is taken into operation. Check the seals and cable entry particularly carefully.
If at any time in the future you should need to dispose of this product or
any part of this product, please note that waste electrical products, bat-
teries or cables should not be disposed of with household waste. Please
recycle where facilities exist, please check with your local authority for
recycling advice.
The abandonment or uncontrolled disposal of waste can cause harm
to environment and human health. So, by recycling this product in a res-
ponsible manner, you contribute to the preservation of natural resources
and to the protection of human health.
www.proindecsa.com / [email protected]
18