Cooking Tips - Redmond RMC-PM381E Manual Del Usuario

página de 196

/ 196
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Connect the device to electrical outlet.

To select an automatic cooking program, press the relevant button on the control panel. It is possible to select a

cooking program by pressing the

and

program lights up.

If necessary, change the default cooking time.

If necessary, change the cooking temperature (for multicooker mode programs) or pressure level (for pressure cooker

mode programs).

If necessary, set the start delay time.

The characteristics may be changed in any order.

When pressing the

button on any setting stage, the program with the entered characteristics starts.

10. Press the

button to start a cooking program. Depending on the cooking program selected, countdown starts after

or upon achievement of the necessary temperature and pressure in the bowl.

In some automatic programs, the set cooking time counting starts only after the device has reached the set operation tem-

perature. For example, in the STEAM/BOIL program the countdown starts only after water is boiled and sufficient dense steam

in the bowl is formed.

While achieving the set characteristics, the

the pressure cooker mode programs, the pressure level scale is filled up to the set pressure value. Once the working character-

istics are achieved, the device gives an audible signal. The

go off or light up continuously if the program runs under pressure.

11. Three short audible signals notify that a cooking program is finished. Once the program running/Keep Warm is over,

"End" inscription appears on the display for several seconds.

12. When using the pressure cooker mode programs, upon completion of cooking let the device cool for several minutes.

Then bring the steam valve to the Open positions to normalize the pressure in the working chamber.

Press the

button to cancel the entered program, interrupt the cooking process or Keep Warm.

DO NOT:

– fill the bowl with products and water over the maximum mark on the inner surface of the bowl;

– cook in the pressure cooker mode without adding water or other fluid (min. required fluid level is 2 measuring cups);

– use the pressure cooker mode to fry products on oil.

To obtain a high-quality result, you are suggested to use the recipes for cooking from the cookbook attached to the pressure

multicooker, designed specifically for this model. Relevant recipes can also be found on the website www.redmond.company.

Table of Default Settings

Programme

Recommendations for use

Cooking whole and crushed grains, and various

RICE/GRAIN

side dishes

Cook baked milk, canned meat, fore shank, meat

SLOW COOK

jelly and aspic

SOUP

Cook different types of soups and broths

Make meat, fish, vegetable, side and multicompo-

STEW

nent dishes stews

YOGURT/

Cook different yogurts, proofing dough

DOUGH

buttons. The programs are switched circle-wise, the indicator of selected

and

indicators blink, and the pressure level scale is filled up. When using

indicator stops blinking,

indicator and pressure level scale

1 min – 2 h /

