marklin 60652 Manual De Instrucciones página 12

Important: Point 9 only works if the locomotive is ready for it, when
the locomotive is being powered by the Mobile Station, the loco-
motive has perfect electrical contact, and no other locomotives
are in the area of track being powered by this Mobile Station.
Changing the Designation in the Display
Requirement: The locomotive data to be changed are shown
in the display.
1. Press the Menu/ESC button.
2. Turn the speed control knob until "EDIT LOC" appears
in the display.
3. Press on the speed control knob.
4. Turn the speed control knob until "NAME" appears in the display.
5. Press on the speed control knob.
6. Turn the speed control knob and change the first letter
in the process.
7. A Press on the speed control knob. Now the 2nd letter can
be turned by running the speed control knob.
8. Continue with the following commands:
Pressing on the speed control knob: Moves one position forward.
Pressing the Menu/ESC button: Moves one position back.
Pressing the LOCOMOTIVE/OK button: Accepts the new
designation.
(=> Appendix I)
Maximum recommended length for a designation: 10 letters.
Tip: Letters can be deleted by overwriting them with another
character. BLANK spaces (" ") at the end of the entry are auto-
matically deleted when the entry is applied.
Deleting a Locomotive from the Locomotive List
Requirement: Speed Level = 0 (locomotive stopped)
1. Press the LOCOMOTIVE/OK button.
2. Turn the speed control knob until the locomotive to be deleted
appears in the display.
3. Press the LOCOMOTIVE/OK button.
4. Press the Menu/ESC button.
5. Turn the speed control knob until "DELETE LOC" appears
in the display.
6. Pressing on the speed control knob. The confirmation question
"DELETE LOC?" will appear in the display.
7. Exit by pressing on the LOCOMOTIVE/OK button.
(=> Appendix J)
12
OPTIONS
The language version can be set in this area, and the entire
Mobile Station can be returned to the default settings. The sub-
menu "INFO" is only the Märklin Service Department for repairs
and is not set up for end users.
Language Version
Languages that can be set: German, English, French, Dutch
1. Press the Menu/ESC button.
2. Turn the speed control knob until "SETUP" appears
in the display.
3. Press on the speed control knob.
4. Turn the speed control knob until "LANGUAGE" appears
in the display.
5. Press on the speed control knob.
6. Turn the speed control knob until the desired language
appears in the display.
7. Press the LOCOMOTIVE/OK button.
(=> Appendix K)
PRESET
Important: When a PRESET is carried out of all of the locomoti-
ve data in the list (including changes / address, name) are lost!
With a Mobile Station from a starter set, the data set at the fac-
tory for the locomotive(s) from the starter set are written into the
list again, when a PRESET is carried out.
1. Press the Menu/ESC button.
2. Turn the speed control knob until "SETUP" appears
in the display.
3. Press on the speed control knob.
4. Turn the speed control knob until "PRESET" appears
in the display.
5. Press on the speed control knob.
6. The confirmation question "PRESET?" will appear in the dis-
play. Pressing the LOCOMOTIVE/OK button: Reset is carried
out. Pressing the Menu/ESC button several times will return
you to the main operation level without the Reset being
carried out.
Important: If you press the STOP button and the speed
control knob simultaneously for longer than 1 second
when turning on the power supply to the Mobile Station,
this will cause a PRESET without a safety inquiry to be
carried out directly!